Tungsten Carbide Rod

Tungsten Carbide rod K05 K10 K20 K30 K40 M05 M10 M20 M30 , Cemented carbide bars have high density, high hardness and wear resistance, and are excellent materials for various tool parts. Carbide rods are used in the manufacture of various metals, and there are no metal cutting machines, shearing machines, wear-resistant tools, such as knives, etc. It can be used in electric internal furnaces, heat

Jinxing is a special tungsten carbide rods manufacturer and exporter in mainland of China, it supplies nearly all kinds of products made of tungsten carbide, e.g. drawing dies, seals, bars, rods, button, rings, blades, blocks and so on.

s widely known as one kind of carbide cutting tools, it’s available for different grinding geometric parameters and suitable for both cutting materials and nonmetal materials, also it can be applied to conventional, semi-automatic lathe, automatic lathe and planning machine to work grooves and operate cutting, etc.

  • Tungsten Carbide Rod
  • Tungsten Carbide Plate
  • Tungsten Carbide Ball
  • Tungsten Carbide Die
  • Tungsten Carbide Ring
  • Main advantages of carbide bars:

1. High hardness after quenching and tempering
2. Excellent wear resistance
3. Excellent hot-work performance


 

M05 YL10.2 14.7 ≥2430 ≥91.8 Suitable for nickel base and iron-based high temperature alloy.finishing of High strength steel.cold deadhead.heat-resistance stainless steel.high manganese steel and finish machining of quenched steel
 
YS8 13.9 ≥1720 ≥92.5
YG10X 13.9 ≥1720 ≥92.5
M10 YW1 12.9 ≥1390 ≥92 Suitable for finish machining and semi-finishing of stainless steel and ordinary
13 ≥1290 ≥91.5
M20 YS25 12.8~13.2 ≥1760 ≥91.5 Suitable for semi-finishing of stainless steel and   low alloy steel
YW2 12.9 ≥1460 ≥90.5
M30 R30S 12.7~13.5 ≥1820 ≥91.5 Suitable for rough machining of heat-resisting alloy steel
K05 RK05 14.9~15.1 ≥1800 ≥92 Suitable for finish machining of cast iron and non-ferrous metals and machining of   nonmetal
YG3X
YG3 ≥2000 ≥93
RK10VF
K10 YG6 14.8~15.1 ≥1800 ≥90 Suitable for finish machining of cast iron and non-ferrous metals and machining of   nonmetal,also suitable for machining of manganese steel and hardened steel
RK10 14.7~15.0 ≥1860 ≥91
RK10F 14.8~15.1 ≥1800 ≥90.5
K20 YG8 14.7~15.0 ≥2200 ≥89.5 suitable for semi-finishing of cast iron and mild alloy.also for wood.plastic.chemical fiber.rubber.paperboard and nonmetal.
RK20F 14.60~14.9 ≥2000 ≥91
K30 YG9C 14.4~14.8 ≥2060 ≥89.0 suitable for machine part.press tool.Geological Mining Tools.wear part.standard component.platen for hot rolling.formwork.corrosion resisting
YG11C 14.0~14.6 ≥2100 ≥88.0
YG13C 14.0~14.6 ≥2300 ≥86.5
YG15C 13.8~14.4 ≥2500 ≥86.0
YG15 13.8~14.4 ≥2360 ≥87.0
K40 YG20C 13.4~14.0 ≥2600 ≥83
YG20 13.4~14.0 ≥2520 ≥85
YG25 12.8~13.6 ≥2700 ≥81
RLN15 7.7~8.3 ≥1720 ≥88.5