Inconel Alloy 600 Tube also called with its specification like NA14 tube, N06600 tube, BS3076 tube, 2.4816 tube, NCr15Fe (FR) tube, NiCr15Fe (EU) tube and NiCr15Fe8 (DE) tube. Alloy 600 Tube, Inconel 600 Seamless Tubing supplier , Inconel 600 Welded Tube, AMS 5580 tubing, SB167 N06600, Alloy 600 Tubing
Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
Inconel Alloy 600 Tube also called with its specification like NA14 tube, N06600 tube, BS3076 tube, 2.4816 tube, NCr15Fe (FR) tube, NiCr15Fe (EU) tube and NiCr15Fe8 (DE) tube. Alloy 600 Tube, Inconel 600 Seamless Tubing supplier , Inconel 600 Welded Tube, AMS 5580 tubing, SB167 N06600, Alloy 600 Tubing
|
Form |
ASTM |
|
Rod, bar and wire |
ASTM B166 |
|
Plate, sheet and strip |
ASTM B168, ASTM B906 |
|
Seamless pipe and tube |
ASTM B167, ASTM B829 |
|
Welded pipe |
ASTM B517, ASTM B775 |
|
Welded tube |
ASTM B516, ASTM B751 |
|
Welding fitting |
ASTM B366 |
|
Billet and bar for reforging |
ASTM B472 |
|
Forging |
ASTM B564 |
Chemical composition：
|
% |
Ni |
Cr |
Fe |
C |
Mn |
Si |
S |
Cu |
|
min |
72 |
14 |
6 |
|
|
|
|
|
|
max |
|
17 |
10 |
0.15 |
1 |
0.5 |
0.015 |
0.5 |
|
Density |
8.47 g/cm3 |
|
Melting range |
1354-1413℃ |
The alloy can be strengthened by cold working, or it can be connected by electric resistance welding, fusion welding or brazing. It is suitable for making anti-oxidation parts with low load below 1100 °C.
Application:
● Thermowell in an erosive atmosphere
● Vinyl chloride monomer production: anti-chlorine gas, hydrogen chloride, oxidation and carbonization corrosion
● Uranium oxidation to hexafluoride: anti-hydrogen fluoride corrosion
● The production and use of corrosive alkali metals, especially the use of sulfides
● Using chlorine gas to make titanium dioxide
● Production of organic or inorganic chlorides and fluorides: corrosion resistance to chlorine and fluorine
● Nuclear reactor
● The retort and components in the heat treatment furnace, especially in carbonized and nitriding atmospheres
● Catalytic regenerators used in petrochemical production are recommended to use alloy 600H in applications above 700 °C for longer service life.